04.11.2012 Views

0 Contents - Hilti Svenska AB

0 Contents - Hilti Svenska AB

0 Contents - Hilti Svenska AB

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Fastenings to steel<br />

Average tensile Scatter Embedment Steel Steel<br />

failure load depth thickness strength<br />

Nail Nu,m [kN] [%] hET [mm] tll [mm] fu [N/mm 2 ]<br />

X-EGN 14 MX 3.62 13.7 8.6 6 543<br />

X-U 16 MX 17.46 4.0 12.2 6 634<br />

Application requirements<br />

Thickness of base material<br />

Concrete<br />

X-U: hmin = 80 mm<br />

X-GHP, X-GN: hmin = 60 mm<br />

Steel<br />

tIl ≥ 4 mm<br />

Thickness of fastened material<br />

Fasteners recommended for cable ∅ 8 mm and 10 mm<br />

X-ECTMX, X-EKSMX,<br />

X-EMTSC<br />

Spacing and edge distances<br />

50–100 cm along the cable tie. Adjust spacing as needed to achieve stability of cable tie<br />

Corrosion information<br />

These zinc coated fasteners are not suitable for long-term service outdoors or in otherwise<br />

corrosive environments.<br />

For further detailed information on corrosion see corresponding chapter in section Direct<br />

Fastening Technology.<br />

Recommended setting range<br />

No general restrictions existent. Limitations are depending on application and user requirements.<br />

11 / 2007 4.207<br />

tII

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!