0 Contents - Hilti Svenska AB

X-MGR
Load data
Design data
Recommended tensile loads Nrec [kN]
Nrec = 0.6 kN (135 lb)
Application requirements
Thickness of base material
tII = 3 –25 mm (0.118–0.984'')
Thickness of fastened material
Grating height:
HG = 25–40 mm (0.98''–1.57'')
Notes/Conditions:
• Tensile loading is limited by plastic deformation
of the saddle clip
• X-MGR resist shear by friction and is not
suitable for explicit shear load designs
Test data
Important note: Test data are for information only and can't be used for design. These data
are examples and not representing the whole range of applications and load cases. For more
detailed information please contact Hilti.
Tensile load at elastic limit of the system
System Elastic limit
Ns [kN]
X-MGR M/W60 1.8
4.76 11 / 2007
tII
HG