0 Contents - Hilti Svenska AB

X-IE
Load data
Design data
Recommended loads
Insulation thickness tI [mm]
X-IE 6 Shear, Vrec [N]
40 45 50 60 70 75 80 100 120 140
Polystyrol [15 kg/m 3 ] 150 200 250 300 300 325 350 350 350 350
Styrofoam [15 kg/m 3 ] 600 600 600 600 600 600 600 600 600 600
Pullover, Nrec [N]
Polystyrol [15 kg/m 3 ] 250 270 290 300 300 300 300 300 300 300
Styrofoam [15 kg/m 3 ] 300 300 300 300 300 300 300 300 300 300
HDT 90 Pullover, Nrec [N]
Mineral wool [ ≥ 7.5 kN/m 2 ]* – – – 135 135 135 135 135 135 135
Mineral wool [ ≥ 15 kN/m 2 ]* – – – 250 250 250 250 250 250 250
*) Tensile Strength σmt according to DIN EN 1607
When base material properties are questionable, jobsite qualification a necessary
N
V
Test data
For more detailed information on the performance of the system please inquire at Hilti.
Application requirements
Thickness of base material
Concrete: hmin = 80 mm
Steel: tll ≥ 4 mm
Thickness of fastened material
Insulation thickness: tl = 25–140 mm
Spacing and edge distances
For setting instructions please inquire at the insulation material supplier.
Corrosion information
Corrosion information see X-IFV / SX-FV Approvals
4.166 11 / 2007