0 Contents - Hilti Svenska AB

Application requirements
Thickness of base material
hmin
70
Concrete
hmin = 80 mm
dnom
Thickness of fastened material
tI ≤ 50.0 mm
Spacing and edge distances
Distance to edge of concrete
/ sand lime masonry:
70
Spacing along track (per U. S. Gypsum
Handbook)
160-800
Steel
tll ≥ 4 mm
X-ZF
11 / 2007 4.111
100
22
80
tII
Fastener spacings on wood: Distance to edge of steel:
Corrosion information
The intended use for safety relevant and permanent applications only comprises fastenings
which are not directly exposed to external weather conditions or moist atmospheres. For further
detailed information on corrosion see corresponding chapter in section Direct Fastening
Technology.
Recommended setting range
40
80
80
40
80
15
At track ends (cut-outs for doors), secure
with two nails
No general restrictions existent. Limitations are depending on application and user requirements.
40