0 Contents - Hilti Svenska AB

Fastener selection and system recommendation
Base material Fastened Fastener Threading Shank DX tools
thickness thickness Designation 1 ) Item no. length lengths
tll,min [mm] tl,max [mm] Lg [mm] Ls [mm]
4.0 1.5 X-EM6H-8-9 FP8 380963 8 8.5 DX 460
4.5 X-EM6H-11-9 FP8 380962 11 8.5 DX 460
13.5 X-EM6H-20-9 FP8 380961 20 8.5 DX 460
4.5 X-EW6H-11-9 FP8 380969 11 8.5 DX 460
13.5 X-EW6H-20-9 FP8 380968 20 8.5 DX 460
21.5 X-EW6H-28-9 FP8 380967 28 8.5 DX 460
31.5 X-EW6H-38-9 FP8 380966 38 8.5 DX 460
0.5 X-EF7H-7-9 FS8 380972 7 10 DX 460
6.0 2.0 X-EM8H-11-12 P8 380979 11 12 DX 460
6.0 X-EM8H-15-12 P8 380978 15 12 DX 460
Cartridge recommendation
Tool energy adjustment by installation tests on site
Fastener Cartridge selection DX tool
X-EM6H, X-EW6H, X-EF7H 6.8/11M green or yellow cartridges DX 460
X-EM8H 6.8/18M blue or red cartridges DX 76
6.8/11M yellow or red cartridges DX 460
X-EM / X-EW
6.0 X-EM8H-15-12 FP10 380977 15 12 DX 76, DX 460
14.0 X-EM10H-24-12 P10 380981 24 12 DX 76, DX 460
20.0 X-EW10H-30-14 P10 380983 30 14 DX 600 N
1 ) Type of threading: M = metric; W6, W10 = Whitworth 1 /4“; 3 /8“; F7 = French 7 mm
X-EM10H/EW10H 6.8/18M blue or red cartridges DX 76
6.8/11M red cartridges DX 460
6.8/18 red or black cartridges DX 600N
11 / 2007 4.57