0 Contents - Hilti Svenska AB

X-ENP 2K
Liner trays
90°
c
Clearance to side of
sheet
c
75
c
Clearance to side of
sheet
c ″ 75 mm if possible
1) If not possible, then as close as possible with fastening
90° to surface plus a second fastener at the other
side of the tray (as shown in graphs above).
Corrosion information
The intended use only comprises fastenings which are not directly exposed to external
weather conditions or moist atmospheres. For out-door applications that can be ensured by
using SDK 2 sealing caps. For further detailed information on corrosion see corresponding
chapter in section Direct Fastening Technology.
Recommended setting range
Steel thickness, tII [mm]
9
8
7
6
5
4
S 235
S 275
2.7
S 355
350 400 450 500 550 600 650
Steel strength Rm [N/mm2 ]
Fastener selection and system recommendation
4.16 11 / 2007
20
Clearance to end of
sheet
80
Fastener spacing along
sheet
Working beyond the recommended application
range will lead to an increase of the failure
rate.
Fasteners Tools
Designation Item-Number
Single nail: X-ENP 2K-20 L15 385133 DX 76 F15, DX 76 PTR
Collated nails: X-ENP 2K-20 L15 MX 385134 DX 76 MX, DX 76 PTR