0 Contents - Hilti Svenska AB

Spacing and edge distance (mm)
Corrosion information
No restrictions exist for temporary fastenings.
Recommended setting range
For temporary fixations no restrictions exists.
Fastener selection and system recommendation
Fasteners Tools
Designation Item no. L [mm] LS [mm] tl,min–tl,ma [mm] Designation
SL 47 DP8 370514 48.6 25 20–24 DX 460, DX 36, DX-E 72
SL 54 DP8 370508 55.6 25 27–31 DX 460, DX 36, DX-E 72
SL 62 DP8 370509 63.6 25 36–40 DX 460, DX 36, DX-E 72
SL 72 DP8 370510 73.6 25 45–49 DX 460, DX 36, DX-E 72
SL 44 MX 370503 45.6 23 17–21 DX 460-MX
SL 47 MX 370504 48.6 25 20–24 DX 460-MX
SL 54 MX 370505 55.6 25 27–31 DX 460-MX
SL 62 MX 370506 63.6 25 36–40 DX 460-MX
Cartridge selection and tool energy setting
Cartridge recommendation:
6.8/11M yellow or red cartridge
Tool energy adjustment by setting tests on site.
11 / 2007 4.143
SL