0 Contents - Hilti Svenska AB

Fastener selection and system recommendation
Fastener program
Fastener with pre-mounted DX-nail: Technical information
Old / current portfolio New / future portfolio Tools
Shank Shank Shank Shank
Ø length Ø length
ds Ls ds Ls
Base material Designation [mm] [mm] Designation [mm] [mm]
➀ Polyamide 1 ) X-EKB8 DNIH 37 PH 3.7 37
➀ X-EKB8 DNIH 42 PH 3.7 42
➁ X-EKB16 DNIH 37 PH 3.7 37
➁ X-EKB16 DNIH 42 PH 3.7 42
➄ X-ECH-S DNIH 37 PH 3.7 37
➄ X-ECH-S DNIH 42 PH 3.7 42
➅ X-ECH-M DNIH 37 PH 3.7 37
➅ X-ECH-M DNIH 42 PH 3.7 42
➆ X-ECH-L DNIH 37 PH 3.7 37
➆ X-ECH-L DNIH 42 PH 3.7 42
➀ Polyamide 2 ) X-EKB8-FWI DNIH 37 PH 3.7 37
➀ X-EKB8-FWI DNIH 42 PH 3.7 42
➁ X-EKB16-FWI DNIH 37 PH 3.7 37
➁ X-EKB16-FWI DNIH 42 PH 3.7 42
➄ X-ECH/FR-S DNIH 37 PH 3.7 37
➄ X-ECH/FR-S DNIH 42 PH 3.7 42
➅ X-ECH/FR-M DNIH 37 PH 3.7 37
➅ X-ECH/FR-M DNIH 42 PH 3.7 42
➆ X-ECH/FR-L DNIH 37 PH 3.7 37
➆ X-ECH/FR-L DNIH 42 PH 3.7 42
X-EKB8 U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-EKB16 U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-ECH-S U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-ECH-M U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-ECH-L U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-EKB8-FR U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-EKB16-FR U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-ECH/FR-S U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-ECH/FR-M U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
X-ECH/FR-L U 37 4.0 3.7 DX460-F8, DX351-F8, DX36
➂, ➃ All nail shanks: carbon steel, HRC 58, galvanized 5–13 µm
Sleeve/thimble: carbon steel, not hardened, galvanized 5–13 µm
1 ) halogen and silicon free, light grey RAL 7035
2 ) halogen and silicon free, flame retardant, stone grey RAL 7030
For X-U program availability please contact Hilti in your country.
X-EKB, X-ECH
11 / 2007 4.193