0 Contents - Hilti Svenska AB
0 Contents - Hilti Svenska AB
0 Contents - Hilti Svenska AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Fastening metal profiles<br />
Required nail shank length:<br />
Wood LS = hET + tl [mm]<br />
Required depth of penetration hET<br />
Normal weight concrete<br />
hET according to concrete strength fcc<br />
fcc [N/mm 2 ] < 25 > 25<br />
hET [mm] 42 37<br />
System recommendation<br />
Fasteners Tool 1 )<br />
Designation Item no. LS [mm] dnom [mm] Designation<br />
DS 27 P10 46157 27 4.5 DX 460, DX 76<br />
DS 32 P10 46158 32 4.5 DX 460, DX 76<br />
DS 37 P10 46159 37 4.5 DX 460, DX 76<br />
DS 42 P10 46160 42 4.5 DX 460, DX 76<br />
DS 47 P10 46161 47 4.5 DX 460, DX 76<br />
DS 52 P10 46162 52 4.5 DX 460, DX 76<br />
DSH 57 P10 40591 57 4.5 DX 460, DX 76<br />
DS 62 P10 46164 62 4.5 DX 460, DX 76<br />
DS 72 P10 46165 72 4.5 DX 460, DX 76<br />
1 ) Nail length limits are for use without pre-driving into the wood. Hand-driving the nail into<br />
the wood and bringing the DX tool into position over the nail head extend the nail length<br />
range for the tools.<br />
Cartridge selection and tool energy setting<br />
Cartridge recommendation: DX 460<br />
Steel: 6.8/11M red cartridge<br />
Concrete: 6.8/11M yellow or red cartridge<br />
Masonry: 6.8/11M green cartridge<br />
Cartridge recommendation: DX 76<br />
Steel: 6.8/18M red or black cartridge<br />
Concrete: 6.8/11M yellow or red cartridge<br />
Tool energy adjustment by setting tests on site.<br />
11 / 2007 4.139<br />
t I<br />
h ET<br />
DS