Installation Notes - USP Connectors
Installation Notes - USP Connectors
Installation Notes - USP Connectors
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
UNIVERSAL MASONRY HANGERS – UMH SERIES<br />
A versatile solution for hanging beams from masonry walls.<br />
Face mount design allows hanger to be used with beam<br />
heights from 16˝ to 24˝. Available in a variety of widths<br />
for solid sawn, glulam, or engineered lumber beams.<br />
Materials: 1/4˝ steel<br />
Finish: <strong>USP</strong> primer<br />
Codes: Load values derived from data submitted to various<br />
North American building code evaluators.<br />
NEW<br />
5 1 /4˝ Min.<br />
edge distance<br />
2 3 /4˝ bolts.<br />
(see footnote 2)<br />
Bond beam with<br />
(1) #5 rebar continuous<br />
© Copyright 2013 <strong>USP</strong> Structural <strong>Connectors</strong> ®<br />
<strong>Installation</strong>:<br />
• Use all specified fasteners. See Product <strong>Notes</strong>, page 10.<br />
• Fully grouted and reinforced concrete block or cast-in-place<br />
concrete with a minimum of (1) #5 rebar continuous to<br />
footing with standard hook at bolt locations.<br />
• Minimum joist bearing length is 31/2˝.<br />
Typical UMH<br />
installation<br />
3 1 /2˝ Min.<br />
joist bearing<br />
15 1/2˝<br />
5˝<br />
W<br />
UMH<br />
Fastener Schedule<br />
Factored Resistance<br />
Header 2,3 Joist 4,5 Cast-in-Place Cast-in-Place<br />
Masonry (Lbs) Masonry (kN)<br />
Concrete (Lbs) Concrete (Lbs)<br />
2500 psi 2500 psi<br />
3000 psi 3000 psi<br />
<strong>USP</strong><br />
Steel W Bolt<br />
Wood<br />
Vertical Uplift 1 Vertical Uplift 1 Vertical Uplift 1 Vertical Uplift 1<br />
Stock No. Ref. No. Gauge (in) Qty Dia. (in) Qty Type Species 100% 115% 100% 115% 100% 115% 100% 115%<br />
UMH358<br />
<br />
DF-L 11875 8205 52.82 36.50 11875 8205 52.82 36.50<br />
3 3-5/8 2 3/4 16 16d<br />
<br />
S-P-F 8430 5825 37.50 25.91 8430 5825 37.50 25.91<br />
UMH458<br />
UMH538<br />
-- --<br />
-- --<br />
3<br />
3<br />
4-5/8<br />
5-3/8<br />
2<br />
2<br />
3/4<br />
3/4<br />
16<br />
16<br />
16d<br />
16d<br />
DF-L<br />
DF-L<br />
11875<br />
11875<br />
8205<br />
8205<br />
52.82<br />
52.82<br />
36.50<br />
36.50<br />
11875<br />
11875<br />
8205<br />
8205<br />
52.82<br />
52.82<br />
36.50<br />
36.50<br />
S-P-F<br />
S-P-F<br />
8430<br />
8430<br />
5825<br />
5825<br />
37.50<br />
37.50<br />
25.91<br />
25.91<br />
8430<br />
8430<br />
5825<br />
5825<br />
37.50<br />
37.50<br />
25.91<br />
25.91<br />
UMH558<br />
<br />
DF-L 11875 8205 52.82 36.50 11875 8205 52.82 36.50<br />
3 5-5/8 2 3/4 16 16d<br />
<br />
S-P-F 8430 5825 37.50 25.91 8430 5825 37.50 25.91<br />
UMH718 -- -- 3 7-1/8 2 3/4 16 16d<br />
DF-L 11875 8205 52.82 36.50 11875 8205 52.82 36.50<br />
S-P-F 8430 5825 37.50 25.91 8430 5825 37.50 25.91<br />
1) Factored resistances have been increased 15% for short-term loads such as wind and earthquake; no further increase allowed.<br />
<br />
<br />
<br />
<br />
5) NAILS:<br />
red font.<br />
Hangers<br />
1-800-328-5934 • www.<strong>USP</strong>connectors.com 109<br />
<strong>USP</strong>2240-131