Installation Notes - USP Connectors
Installation Notes - USP Connectors
Installation Notes - USP Connectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Face Mount Hangers – HDQIF series<br />
HDQIF hangers are heavy capacity face mount hangers<br />
that can be used to support LVL, LSL and PSL beams and<br />
headers.<br />
Materials: 14 gauge<br />
Finish: G90 galvanizing<br />
Codes: Load values are derived from data<br />
submitted to various North American<br />
building code evaluators.<br />
H<br />
EWP Hangers<br />
© Copyright 2013 <strong>USP</strong> Structural <strong>Connectors</strong> ®<br />
<strong>Installation</strong>:<br />
• Use all specified fasteners. See Product <strong>Notes</strong>, page 10.<br />
• WS15 and WS3 Wood Screws are supplied with<br />
HDQIF hangers.<br />
Face Mount Hangers – HUS series<br />
Up to 3/4˝<br />
gap<br />
Typical HDQIF<br />
installation<br />
W<br />
HDQIF<br />
3˝<br />
Designed for medium load conditions. Extended 3˝ deep seat provides extra truss bearing.<br />
Materials: 16 gauge<br />
Finish: G90 galvanizing<br />
Codes: Load values are derived from data submitted to various North American<br />
building code evaluators.<br />
<strong>Installation</strong>:<br />
• Use all specified fasteners. See Product <strong>Notes</strong>, page 10.<br />
• Joist nails must be driven at a 30° to 45° angle through<br />
the joist into the header to achieve listed loads.<br />
Drive joist nails into<br />
header at 30° to 45° to<br />
achieve listed loads.<br />
Typical HUS<br />
installation<br />
2˝<br />
H<br />
Dimple allows<br />
30˚ to 45˚<br />
nailing<br />
Typical HUS<br />
double shear installation<br />
W<br />
HUS<br />
3˝<br />
1-800-328-5934 • www.<strong>USP</strong>connectors.com 119<br />
<strong>USP</strong>2240-131
Change language