Pano System for Cloud Administrator's Guide - Pano Logic

• Windows XP (32 bit) - PanoVirtualClient_WinXP_x86-6.0.0.msi
Copy all of the installer .msi files you’ll need for the Windows operating systems you plan to use
on your host PCs to a location that is accessible to your Active Directory server.
Prepare Network Infrastructure
Check Active Directory and Workgroup Configuration
Windows machines which are within a Workgroup cannot use the DNS Service Record to locate
the Pano Controller for Cloud. The machines that will host Pano Virtual Client should either:
• Be added to your Active Directory domain.
• Have a Registry Key loaded which will tell the PC where the Pano Controller for Cloud is.
You will need to manually add a registry key that holds the IP address of Pano Controller for
Cloud in the Windows registry on each host PC. For convenience this registry key can be saved
as a .reg file using the regedit.exe tool included with Windows. This .rteg file can then
distributed and run on each host PC to add the registry key.
The registry key needed is called “PanoController Address”- the complete registry path to the
key is: “HKEY_LOCAL_MACHINE\SOFTWARE\Pano Logic\Pano\Direct\PanoController Address”
If the key isn’t already present create it as a String Value type - the value of the key is the IP
address of your Pano Controller plus a colon and the port number used by the Pano Direct
Protocol, 8320 - for example: 192.168.10.21:8320.
If neither of these option is desirable, you must configure your Pano Controller for Cloud to use
the probe method of client discovery.
37 � Pano System for Cloud Administrator’s Guide