Pano System for Cloud Administrator's Guide - Pano Logic

More documents

Recommendations

Info

Check DHCP Server Setup Ensure that your DHCP server is able to provide sufficient dynamically-assigned IP addresses to your Pano Virtual Client PCs. Static IP addresses and DHCP reservations can also be used for the PC’s IP addresses. Add a Service Record for Pano Controller for Cloud to the DNS Server 1. Go to your DNS server and select the zone for your domain. We strongly recommend that you use your Active Directory domain controller as your DNS server; using other types of DNS servers may not work with Pano Virtual Client. 2. Right click; select “New Other Records”->”Service Location(SRV)” and click “Create Record” 3. In the service field type “_panocontroller.” 4. In the protocol field type “_udp” 5. In the Port number field type “8320” 6. In the Host offering this service field, type the IP or hostname of your Pano Controller for Cloud. If you have an HA Pano Controller environment, this should be the HA IP/Hostname. Note: Optionally, you can use a registry key to point to the Pano Controller for Cloud that is managing the Pano Virtual Clients. The path is /hkm/software/pano_logic/panodirect and the key is reg_sz, of type ‘string’. Deploy Pano Virtual Clients Follow these steps to do an automated deployment via Active Directory: 1. Create an Active Directory group policy that will distribute Pano Virtual Client to PCs under this OU. If you plan to support Pano Virtual Clients running Windows 7 and Windows XP, you'll need to create two separate deployment GPOs. * Each policy should be restricted via WMI filter to either Windows 7 or Windows XP, depending on which OS you intend to use on the PCs. * Each policy should be set to remove software if the PC falls out of the group policy scope. * Set the Windows 7 policy to not allow the 32-bit version to run on 64-bit Windows. 38 � Pano System for Cloud Administrator’s Guide
The resulting Active Directory group policy is shown below: 2. Add a WMI filter to restrict GPO to Windows 7, as illustrated below: 3. Edit the newly created WMI filter for Windows 7 and use the WMI Query: * Select * from Win32_OperatingSystem where Version ProductType = "1". * Add a Windows 7 Pano Virtual Client Deployment GPO which uses this WMI filter. 39 � Pano System for Cloud Administrator’s Guide
Page 1 and 2: Pano System for Cloud Administrator
Page 3 and 4: Table of Contents Users & Workloads
Page 5 and 6: applications that use ActiveX contr
Page 7 and 8: Characteristic Pano System for Clou
Page 9 and 10: Chapter 0Installing 9 � Pano Syst
Page 11 and 12: Server Requirements for Uninstalled
Page 13 and 14: To connect to the Pano Controller f
Page 15 and 16: View Clients Pano Zero Clients and
Page 17 and 18: Types of Google Cloud Print Printer
Page 19 and 20: 19 � Pano System for Cloud Admini
Page 21 and 22: This illustrates these different li
Page 23 and 24: the Pano Controller for Cloud conso
Page 25 and 26: Chapter 0Administering 25 � Pano
Page 27 and 28: Monitor Your System There are two t
Page 29 and 30: Output from the top command include
Page 31 and 32: 31 � Pano System for Cloud Admini
Page 33 and 34: of a certain thickness; given the v
Page 35 and 36: Requirements for Implementing Pano
Page 37: • Windows XP (32 bit) - PanoVirtu
Page 41 and 42: Order of GPOs on Pano Virtual Clien
Page 43 and 44: • Logoff - pressing this button w
Page 45 and 46: session. However, function key comb
Page 47 and 48: c. If prompted, go to the vendor’
Page 49 and 50: Add Pano Logic Vendor Class for Net
Page 51 and 52: Add Pano Logic Vendor Class for Inf
Page 53 and 54: 8. Restart the grid services again.
Page 55 and 56: • General FAQs • USB & Peripher
Page 57: Ubuntu FAQs Why Ubuntu? Pano Logic

Pano System for Cloud Administrator's Guide - Pano Logic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?