Programming Guide DS2000 Series Digital Oscilloscope

RIGOL
2 Command System
:CALCulate:LOGic:SA
Syntax
:CALCulate:LOGic:SA
:CALCulate:LOGic:SA
Description
Select the channel source of signal source A of logic operation.
Query the current channel source of signal source A of logic operation.
Parameter
Name Type Range Default
Discrete {CHANnel1|CHANnel2} CHANnel1
Explanation
The signal source specified by this command is used instead of the signal source
specified by the :CALCulate:LOGic:SB command if the current logic operation type is
NOT.
Return Format
The query returns CHAN1 or CHAN2.
Example
:CALCulate:LOGic:SA CHANnel2
The query returns CHAN2.
2-108 DS2000 Programming Guide
2-108