Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:MEASure:CREGion:CAX
Syntax
:MEASure:CREGion:CAX
:MEASure:CREGion:CAX
Description
When the measurement range is set to the cursor region, use this command to set
the position of cursor A.
Query the current position of cursor A.
Parameter
Name Type Range Default
Integer
0 to (the current position of
cursor B - 6)
300
Explanation
You can use the MEASure:AREA command to set the measurement range to the
cursor region.
For the position of cursor B, refer to the :MEASure:CREGion:CBX command.
Return Format
The query returns an integer.
Example
:MEASure:CREGion:CAX 20
The query returns 20.
DS2000 Programming Guide 2-263