Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:MEASure:VAVG
Syntax
:MEASure:VAVG
Description
Query the average of the amplitude of the selected waveform.
Parameter
Name Type Range Default
Discrete {CHANnel1|CHANnel2} CHANnel2
Explanation
The unit depends on the unit of the source channel (refer to
the :CHANnel:UNITs command).
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:VAVG CHANnel1
The query returns -8.331421e-02.
You can use the following commands to query the statistic maximum, minimum,
current value, average and standard deviation of the amplitude averages of the
selected waveform. Sending the following commands will enable the statistic
function automatically.
• :MEASure:VAVG:SMAXimum
• :MEASure:VAVG:SMINimum
• :MEASure:VAVG:SCURrent
• :MEASure:VAVG:SAVerage
• :MEASure:VAVG:SDEViation
DS2000 Programming Guide 2-357