Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:FUNCtion:WANalyze:SETup:SSTart
Syntax
:FUNCtion:WANalyze:SETup:SSTart
:FUNCtion:WANalyze:SETup:SSTart
Description
Set the screen start point of waveform analysis.
Query the current screen start point of waveform analysis.
Parameter
Name Type Range Default
Integer 5 to 685 5
Explanation
The screen start point set should be less than the “screen end-10” (refer to
the :FUNCtion:WANalyze:SETup:SSENd command).
Return Format
The query returns an integer between 5 and 685.
Example
:FUNCtion:WANalyze:SETup:SSTart 15
The query returns 15.
DS2000 Programming Guide 2-203