Programming Guide DS2000 Series Digital Oscilloscope

RIGOL
2 Command System
:CURSor:TRACk:BYValue
Syntax
:CURSor:TRACk:BYValue
Description
Query the Y value at cursor B in track cursor measurement.
Explanation
For the vertical position of cursor B, refer to the :CURSor:TRACk:CBY command.
The unit is determined by the unit (refer to the :CHANnel:UNITs command)
selected by the signal source (refer to the :CURSor:TRACk:SOURce2 command) of
cursor B.
Return Format
The query returns the Y value at cursor B in scientific notation.
Example
:CURSor:TRACk:BYValue
The query returns 4.000000e-02.
2-166 DS2000 Programming Guide
2-166