Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:CURSor:TRACk:SOURce1
Syntax
:CURSor:TRACk:SOURce1
:CURSor:TRACk:SOURce1
Description
Set the measurement source of cursor A in track cursor measurement.
Query the current measurement source of cursor A in track cursor measurement.
Parameter
Name Type Range Default
Discrete {CHANnel1|CHANnel2|MATH|NONE} CHANnel1
Note: only channels currently enabled can be selected as the channel source.
Explanation
CHANnel1, CHANnel2: select CH1 or CH2 as the measurement source of cursor A.
MATH: select the waveform of the math operation channel as the measurement
source of cursor A.
NONE: do not use cursor A.
Return Format
The query returns CHAN1, CHAN2, MATH or NONE.
Example
:CURSor:TRACk:SOURce1 CHANnel2
The query returns CHAN2.
DS2000 Programming Guide 2-157