Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:MEASure:ADISplay
Syntax
:MEASure:ADISplay
:MEASure:ADISplay
Description
Enable or disable all measurement.
Query the current status of all measurement.
Parameter
Name Type Range Default
Bool {{0|OFF}|{1|ON}} 0|OFF
Explanation
All measurement can measure all the time and voltage parameters of the current
measurement source. Each measurement source has 20 kinds of measurement
parameters and you can measure the three measurement sources (CH1, CH2 and
MATH) at the same time.
10 kinds of voltage measurement items: maximum, minimum, peak-peak, top,
bottom, amplitude, average, RMS, overshoot and preshoot.
8 kinds of time measurement items: period, frequency, rise time, fall time, positive
pulse width, negative pulse width, positive duty cycle and negative duty cycle.
2 kinds of other measurement items: area and period area.
Return Format
The query returns 0 or 1.
Example
:MEASure:ADISplay ON
The query returns 1.
DS2000 Programming Guide 2-253