Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:BUS:IIC:OFFSet
Syntax
:BUS:IIC:OFFSet
:BUS:IIC:OFFSet
Description
Set the vertical offset in IIC decoding on bus 1 or 2. Before using this command,
enable the bus display (refer to the :BUS:DISPlay command).
Query the current vertical offset in IIC decoding on bus 1 or 2.
Parameter
Name Type Range Default
Discrete {1|2} --
Integer
Normal [1] : -166 to 148
Statistic [2] : -163 to 143 0
Half screen [3] : -103 to 52
Note [1] : the screen display is normal and the statistic function is not enabled (refer to
the :MEASure:STATistic:DISPlay command).
Note [2] : the screen display is normal and the statistic function is enabled (refer to
the :MEASure:STATistic:DISPlay command).
Note [3] : the screen is divided into two windows (refer to the :TIMebase:DELay:ENABle
and :CALCulate:FFT:SPLit commands).
Return Format
The query returns the offset in integer.
Example
:BUS1:IIC:OFFSet 2
The query returns 2.
DS2000 Programming Guide 2-59