Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:TRIGger:SLOPe:BLEVel
Syntax
:TRIGger:SLOPe:BLEVel
:TRIGger:SLOPe:BLEVel
Description
Set the lower limit of the trigger level in slope trigger and the unit is the same with
the current amplitude unit.
Query the current lower limit of the trigger level in slope trigger.
Parameter
Name Type Range Default
Real
± 5 × VerticalScale from the screen center -
OFFSet
0
Note:
For the VerticalScale, refer to the :CHANnel:SCALe command.
For the OFFSet, refer to the :CHANNel:OFFSet command.
Return Format
The query returns the lower limit of the trigger level in scientific notation.
Example
:TRIGger:SLOPe:BLEVel 0.16
The query returns 1.600000e-01.
DS2000 Programming Guide 2-473