Programming Guide DS2000 Series Digital Oscilloscope

RIGOL
2 Command System
*TST
Syntax
*TST
Description
Perform a self-test.
Explanation
The self-test result is denoted by a 32-bit binary number. If the corresponding binary
bit is 0, the self-test item passes the test; while 1 indicates a failure. The return value
is the decimal integer corresponding to the binary number.
The self-test item represented by each bit is as shown in the figure below. The bit
that is not used is always 0.
bit0: system voltage
bit1: analog voltage
bit2: storage system
bit3: digital core
bit4: digital IO
bit8: battery
bit9: fan 1
bit10: fan 2
bit12: inlet temperature
bit13: outlet temperature
bit16: real-time clock
Return Format
The query returns a decimal integer.
Example
*TST
The query returns 0.
2-20 DS2000 Programming Guide
2-20