Programming Guide DS2000 Series Digital Oscilloscope

RIGOL
2 Command System
:CURSor:MANual:VUNit
Syntax
:CURSor:MANual:VUNit
:CURSor:MANual:VUNit
Description
Set the vertical unit in manual cursor measurement.
Query the current vertical unit in manual cursor measurement.
Parameter
Name Type Range Default
Discrete {SUNit|PERCent} SUNit
Explanation
SUNit: when this unit is selected, in the measurement results, the units of CurA, CurB
and △Y will automatically be set to the unit of the current signal source.
PERCent: when this unit is selected, in the measurement results, CurA, CurB and △Y
are in %.
Return Format
The query returns SUN or PERC.
Example
:CURSor:MANual:VUNit PERCent
The query returns PERC.
2-144 DS2000 Programming Guide
2-144