Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:TRIGger:IIC:AWIDth
Syntax
:TRIGger:IIC:AWIDth
:TRIGger:IIC:AWIDth
Description
Set the address bits in IIC trigger when the trigger condition is Address or A&D.
Query the current address bits in IIC trigger when the trigger condition is Address or
A&D.
Parameter
Name Type Range Default
Discrete {7|8|10} 7
Explanation
To set the IIC trigger condition, refer to the :TRIGger:IIC:WHEN command.
Return Format
The query returns 7, 8 or 10.
Example
:TRIGger:IIC:AWIDth 10
The query returns 10.
DS2000 Programming Guide 2-525