Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:MEASure:FDELay
Syntax
:MEASure:FDELay ,
Description
Query the measurement result of the delay between channels (relative to the falling
edge) and the unit is s.
Parameter
Name Type Range Default
Discrete {CHANnel1|CHANnel2} CHANnel1
Discrete {CHANnel1|CHANnel2} CHANnel2
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:FDELay CHANnel1,CHANnel2
The query returns 2.800000e-04.
You can use the following commands to query the statistic maximum, minimum,
current value, average and standard deviation of the delay measurement (relative to
the falling edge) results. Sending the following commands will enable the statistic
function automatically.
• :MEASure:FDELay:SMAXimum
• :MEASure:FDELay:SMINimum
• :MEASure:FDELay:SCURrent
• :MEASure:FDELay:SAVerage
• :MEASure:FDELay:SDEViation
DS2000 Programming Guide 2-267