Programming Guide DS2000 Series Digital Oscilloscope

2 Command System RIGOL
:WAVeform:STOP
Syntax
:WAVeform:STOP
:WAVeform:STOP
Description
Set the stop position of internal memory waveform reading.
Query the current stop position of internal memory waveform reading.
Parameter
Name Type Range Default
Integer
NORMal: 1 to 1400
MAX: 1 to the number of effective
point currently on the screen
RAW: 1 to the current maximum
memory depth
--
Explanation
For the memory depth, refer to the :ACQuire:MDEPth command.
The setting of the stop position is limited by the current reading mode of the
waveform (refer to the :WAVeform:MODE command).
Return Format
The query returns an integer.
Example
:WAVeform:STOP 200
The query returns 200.
DS2000 Programming Guide 2-567