User Manual - Ajckids.com
User Manual - Ajckids.com
User Manual - Ajckids.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fixing Bugs<br />
When you see the screen as per Figure 114 the rescue mode<br />
is active. Now you can start installing the operating system via<br />
the web interface. You can influence the IP settings.<br />
25.1.1.1. Rescue system via DHCP<br />
If you use a DHCP server (also refer to chapter 24.1.) you can<br />
force the rescue system to take the IP address from this server.<br />
• Disconnect your <strong>com</strong>mand station from the mains.<br />
• Press the stop button and the function button F8 of the left cab<br />
simultaneously and hold them down.<br />
Figure 122<br />
• Switch on your <strong>com</strong>mand station.<br />
Please hold down both buttons during the start-up of your<br />
<strong>com</strong>mand station (screen as per figure 121 will open).<br />
25.1.1.2. Rescue system via Static IP<br />
You can force the rescue system to accept a preset IP address.<br />
This option should only be used by experienced <strong>com</strong>puter specialists.<br />
The IP address is 192.168.1.151 /24.<br />
• Disconnect your <strong>com</strong>mand station from the mains.<br />
• Press the stop button and the function button F7 of the left cab<br />
simultaneously and hold them down.<br />
Figure 123<br />
• Switch on your <strong>com</strong>mand station.<br />
Please hold down both buttons during the start-up of your<br />
<strong>com</strong>mand station (screen as per figure 121 will open).<br />
25.2. Execute a factory reset<br />
In many cases technical problems with the software are not<br />
actually caused by the incorrect installation of the software but<br />
rather by errors in the lists of lo<strong>com</strong>otives, accessories, routes<br />
or the track diagrams. Such errors in the so called ”Play status”<br />
can lead to unusual behaviour of the <strong>com</strong>mand station.<br />
In the worst case the <strong>com</strong>mand station gets stuck during startup<br />
and the screen remains blank.<br />
If this is the case you should first delete all lists that contain<br />
objects. Such a factory reset can be ac<strong>com</strong>plished during the<br />
start-up phase.<br />
• Disconnect your <strong>com</strong>mand station from the mains.<br />
• Press the stop button and the function button F6 of the left cab<br />
simultaneously and hold them down<br />
Figure 124<br />
• Switch on your <strong>com</strong>mand station.<br />
• Hold down the buttons during the start-up phase until the<br />
“Go” button blinks shortly.<br />
Do not mistake the function of the rescue mode with the<br />
factory reset. Always try to re-establish the <strong>com</strong>mand station<br />
with a reset first. Basically the rescue mode must only be activated<br />
whenever a software update went wrong (for instance<br />
due to a power interruption during the update).<br />
41
Change language