AS9N010B.STB AS-93plus Service Manual.fm - LIQUID-scan GmbH ...

More documents

Recommendations

Info

Installing Gilson sample racks In addition to the PerkinElmer sample racks, you can also use racks offered by Gilson. Up to four Gilson racks can be installed on the autosampler. Within the WinLab software a sample tray is defined as a group of four racks. To install the Gilson racks on the autosampler you require an adapter plate (option; P/N B314-0680). Please note that the Gilson racks cannot be obtained from PerkinElmer. To install the racks: 1. If necessary, download the required tray definition files more information: page 45. 2. Prepare the autosampler as described under To install the racks: on page 24 (see step 1 through step 5). 3. Place the adapter plate (option; P/N B314-0680) on the sample table. Pins on the underside of the adapter plate engage in slots on the sample table. 4. Place rack type 24 (29mm diam.) on the left-hand side of the sample table. Note You must always place rack type 24 on the left-hand side. Other racks cannot be used in this position. 5. Place the other three racks on the sample table. Figure 8 Placing Gilson Racks on the Adapter Plate (autosampler table not shown) 28 of 68 AS9N010B.STB
Sample tray groups for Gilson racks 1 rack type 24 (29 mm diam.) 3 racks type 21 (13.5mm diam.) Tray definition file for this group of racks: AS93gilson193.tra 1 rack type 24 (29 mm diam.) 3 racks type 22/23 (18.5mm diam.) Tray definition file for this group of racks: AS93gilson145.tra 4 racks type 24 (29 mm diam.) Tray definition file for this group of racks: AS93gilson055.tra AS9N010B.STB 29 of 68
Page 1 and 2: AA Business Unit Service Informatio
Page 3 and 4: Configuration 1 . . . . . . . . . .
Page 5 and 6: Key benefits: • fast, accurate ra
Page 7 and 8: Tray group F This group (provided a
Page 9 and 10: Technical data System design Compac
Page 11 and 12: Checklist of the AS-93plus Accessor
Page 13 and 14: Assembling sample racks For easy sh
Page 15 and 16: Diluter (option) Autosampler Figure
Page 17 and 18: The usual addresses preselected for
Page 19 and 20: Caution: Risk of damage to the auto
Page 21 and 22: Connecting the sample tube The samp
Page 23 and 24: Alternate connection procedure: Ada
Page 25 and 26: 6. Install the sample racks on the
Page 27: Sample tray group G Rinsing port 0
Page 31 and 32: Tubing configurations You can set u
Page 33 and 34: Connecting the tubes for configurat
Page 39 and 40: Installing the rinsing port Lug pas
Page 41 and 42: 7. Click on "Next" to finish the re
Page 43 and 44: AS-93plus Utilities The AS-93 utili
Page 45 and 46: Tray Download A tray definition fil
Page 47 and 48: How to create a tray definition fil
Page 49 and 50: Rinse Download This utility enables
Page 51 and 52: Information The Information window
Page 53 and 54: 1. Carefully turn over the autosamp
Page 55 and 56: If you are using another sample tra
Page 57 and 58: 1. Switch of the AS-93 by unpluggin
Page 59 and 60: 3. Click on the function key "Get X
Page 61 and 62: Checking the Event Relay The Event
Page 63 and 64: Maintenance There are not much part
Page 65 and 66: Pump Commands • stop control.pump
Page 67 and 68: AS-93plus Error Code Reference Tabl

AS9N010B.STB AS-93plus Service Manual.fm - LIQUID-scan GmbH ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?