AS9N010B.STB AS-93plus Service Manual.fm - LIQUID-scan GmbH ...

More documents

Recommendations

Info

Configuration 1 Rinsing port Rinse liquid feed line Bottle with rinse liquid Figure 10 Configuration 1 – Schematic of Tubing Connections Items required for configuration 1 1 2 3 4 8 5 = Color-coded collars on pump tubes Drain line Waste bottle Rinse pump Item Description Part No. 1 Adapter E, 6.3mm o.d. barbed fitting B019-6857 2 Adapter M, 4mm o.d. barbed fitting B050-7919 3 Wide-bore pump tube, 2.79mm i.d., violet-white B314-0721 4 Connector, reducing 3.2mm to 1.7mm B019-9233 5 Narrow-bore pump tube, 1.14mm i.d., red-red B314-0730 6 Connector, 4.5mm to 4.5mm o.d. barbed fittings B314-0715 7 Adapter A, 1.8mm o.d. barbed fitting B019-3342 8 Rinse liquid feed tube B019-1059 9 PVC drain tube B004-8139 32 of 68 AS9N010B.STB 9 6 7
Connecting the tubes for configuration 1 1. Fit the rinse feed pump tube (red-red) (5) and the drain pump tube (violet-white) (3) to the rinse pump as described in Fitting pump tubes to the rinse pump on page 38. Note Always fit a wide-bore drain pump tube (violet-white). 2. Connect up the rinse feed line: 1. Push the wider barbed fitting of the reducing connector (4) into the PVC tube prefitted to the inlet fitting of the rinsing port. 2. Push the end of the rinse feed pump tube ( 5) coming from the upper retaining hook onto the narrower barbed fitting of the reducing connector (4). 3. Push the barbed fitting of adapter A ( 7) into the rinse feed pump tube coming from the lower retaining hook. 4. Screw the connector on the rinse liquid feed tube (8) into adapter A. Tube connector Adapter 3. Connect up the drain line: 1. Screw adapter M (2) into adapter E (1). 2. Push the barbed fitting of adapter E into the silicone tube prefitted to the drain nozzle on the rinsing port. 3. Push the end of the drain tube (3) coming from the lower retaining hook onto the barbed fitting of adapter M. 4. Push the tube connector (6) into the end of the drain pump tube coming from the upper retaining hook. 5. Push one end of the PVC drain tube (9) onto the connector. AS9N010B.STB 33 of 68
Page 1 and 2: AA Business Unit Service Informatio
Page 3 and 4: Configuration 1 . . . . . . . . . .
Page 5 and 6: Key benefits: • fast, accurate ra
Page 7 and 8: Tray group F This group (provided a
Page 9 and 10: Technical data System design Compac
Page 11 and 12: Checklist of the AS-93plus Accessor
Page 13 and 14: Assembling sample racks For easy sh
Page 15 and 16: Diluter (option) Autosampler Figure
Page 17 and 18: The usual addresses preselected for
Page 19 and 20: Caution: Risk of damage to the auto
Page 21 and 22: Connecting the sample tube The samp
Page 23 and 24: Alternate connection procedure: Ada
Page 25 and 26: 6. Install the sample racks on the
Page 27 and 28: Sample tray group G Rinsing port 0
Page 29 and 30: Sample tray groups for Gilson racks
Page 31: Tubing configurations You can set u
Page 35 and 36: Connecting the tubes for configurat
Page 37 and 38: Connecting the tubes for configurat
Page 39 and 40: Installing the rinsing port Lug pas
Page 41 and 42: 7. Click on "Next" to finish the re
Page 43 and 44: AS-93plus Utilities The AS-93 utili
Page 45 and 46: Tray Download A tray definition fil
Page 47 and 48: How to create a tray definition fil
Page 49 and 50: Rinse Download This utility enables
Page 51 and 52: Information The Information window
Page 53 and 54: 1. Carefully turn over the autosamp
Page 55 and 56: If you are using another sample tra
Page 57 and 58: 1. Switch of the AS-93 by unpluggin
Page 59 and 60: 3. Click on the function key "Get X
Page 61 and 62: Checking the Event Relay The Event
Page 63 and 64: Maintenance There are not much part
Page 65 and 66: Pump Commands • stop control.pump
Page 67 and 68: AS-93plus Error Code Reference Tabl

AS9N010B.STB AS-93plus Service Manual.fm - LIQUID-scan GmbH ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?