AS9N010B.STB AS-93plus Service Manual.fm - LIQUID-scan GmbH ...

Connecting the tubes for configuration 2
1. Fit the rinse feed pump tube (violet-white) (5) and the drain pump tube
(violet-white) (3) to the rinse pump as described in Fitting pump tubes
to the rinse pump on page 38.
Note Always fit a wide-bore drain pump tube (violet-white).
2. Connect up the rinse feed line:
1. Push a barbed fitting of the tube connector (4) into
the PVC tube prefitted to the inlet fitting of the
rinsing port.
2. Push the end of the rinse feed pump tube ( 5) coming
from the upper retaining hook onto the other barbed
fitting of the tube connector (4).
3. Push the barbed fitting of adapter C (7) into the rinse
feed pump tube coming from the lower retaining
hook.
4. Screw the connector on the rinse liquid feed tube (8)
into adapter C.
Tube connector
Adapter
3. Connect up the drain line:
1. Screw adapter M (2) into adapter E (1).
2. Push the barbed fitting of adapter E into the silicone tube prefitted
to the drain nozzle on the rinsing port.
3. Push the end of the drain tube (3) coming from the lower retaining
hook onto the barbed fitting of adapter M.
4. Push the tube connector (6) into the end of the drain pump tube
coming from the upper retaining hook.
5. Push one end of the PVC drain tube (9) onto the connector.
AS9N010B.STB 35 of 68