Owner's Manual - West Marine

GETTING STARTED > USING THE 276C PLUSTo enter data in a data field:1. Use the Rocker key to highlight the desired data field andpress ENTER to activate the field.2. Press Up or Down on the Rocker key to select characters.Press Right to move to the next character or press Left tomove back to the previous character. If there are two lines ofdata, keep pressing Right to drop to the next line.3. After entering the desired data, press ENTER.Using the DatabasesOptional Garmin Data Cards and MapSource CD-ROMs enhancethe versatility of your 276C Plus. With optional MapSource CitySelect data, you can view listings of nearby restaurants, lodging,shopping centers, attractions and entertainment, and even retrieveaddresses and phone numbers for any listed location.The included USB Interface Cable or an optional PC Interface Cable(with a serial connector) is used to transfer MapSource CD-ROMdata to the optional Data Card.Refer to the Garmin Web site at http://www.garmin.com/cartography/ for compatible MapSource products.Entering dataTIP: To clear the entire data field, highlight the left-mostcharacter field and press Left once more on the Rocker key.Not all fields are programmable. When you are on a page with fieldsthat are not selectable, the highlight skips over them.10 276C Plus Owner’s Manual190-00501-00_0A.indd 101/13/2005 10:43:26 AM