Owner's Manual - West Marine

SEA MODES PAGES AND FEATURES > ENTERING YOUR VESSEL'S INFORMATIONEntering Your Vessel’s InformationYou can enter information about your vessel that can be displayedwhen you turn on your 276C Plus. The symbol selected is used asthe position marker icon on the Map page. You can enter and saveinformation for up to 15 vessels.Vessel ProfileTo enter vessel information:1. Press MENU twice to open the Main Menu.2. Highlight Vessel from the vertical list of tabs.3. Highlight the on-screen New button and press ENTER.4. Use the Rocker key to enter your vessel’s name oridentifying information in the Current Vessel field. PressENTER when finished.5. Use the Rocker key to enter other information for the vessel,such as the registration number, home port, and a symbol.6. Place a check mark in the box to show the vessel informationwhen you turn the unit on.To select a saved vessel:1. From the Vessel tab, use the Rocker key to highlight theCurrent Vessel field and press ENTER.2. Use the Rocker key to select the desired vessel and pressENTER.To rename or delete a saved vessel:1. From the Vessel tab, use the Rocker key to highlight theCurrent Vessel field and press ENTER.2. Highlight the vessel you want to rename or delete and pressENTER.3. Use the Rocker key to select the on-screen Rename orDelete button and press ENTER. If Rename is selected, usethe Rocker key and ENTER to enter a new name.To change the position marker on the Map page:1. From the Vessel tab, highlight the Symbol field and pressENTER.2. Select the desired symbol from the list and press ENTER.The symbol you select is displayed on the Map page in placeof the standard position marker while you are in a seamode.54 276C Plus Owner’s Manual190-00501-00_0A.indd 541/13/2005 10:43:44 AM