Owner's Manual - West Marine

CUSTOMIZING YOUR 276C PLUS > SETTING UP THE SYSTEMSetting the TimersTo open the Timers tab, press MENU twice, select Setup from thevertical tab list, and Timers from the row of tabs along the top.Changing the TimeThe Time tab allows you to set the time format and zone. You canalso set the unit to conform to Daylight Saving Time. The currenttime and date are displayed at the bottom of the page.To open the Time tab, press MENU twice, select Setup from thevertical tab list, and Time from the row of tabs along the top.Setup Timers TabUser—allows you to set the timer to Count Up or Count Down.You can also Reset the timer and turn it Off. To the right of thisfield, enter a time to use when counting up or down.Marine—displayed on the Compass page. See page 47.Since Midnight—the time the unit has been turned on sincemidnight. This will reset if you restore All Unit Defaults from theSystem tab. See page 87.Setup Time TabTime Zone—allows you to choose a city in your correct time zoneso the 276C Plus shows the correct local time. Select Other to entera UTC Offset.If the incorrect date is displayed, press MENU, highlight Set Date,and press ENTER. You will then be prompted to enter the currentyear. The 276C Plus will use this information when gatheringsatellite data to display the correct date.86 276C Plus Owner’s Manual190-00501-00_0A.indd 861/13/2005 10:43:57 AM