Owner's Manual - West Marine

BASIC OPERATION > MANAGING YOUR TRACKSManaging Your TracksThe 276C Plus draws an electronic breadcrumb trail or “track log”on the Map page as you travel. The track log contains points alongits path that include time and position data.The track log starts recording as soon as the 276C Plus gets alocation fix. For the best results, clear the track log before youstart traveling because when the track log is full, new track pointsoverwrite the oldest track points.The percentage of memory used by the current track log appears atthe top of the Active tab. After the track log is cleared, it displayszero percent. When the display reaches 100%, the most recent trackpoints start to overwrite the least recent track points (if Wrap isselected for Record Mode). To avoid losing track points, save thetrack log when it approaches the 99% mark.You must first save the track log before you can use the NavigateTrack feature. The Save feature allows you to store up to 15 tracklogs from certain times and dates.To access the Track tab:1. Press Menu twice to open the Main Menu.2. Highlight Track from the vertical list of tabs.Setting up and Saving your TracksActive Track TabRecord Mode—Wrap records over the oldest tracks when the tracklog reaches 100%. Fill records a track log until the track log is full(100%). When Off is selected, the unit does not record tracks.Interval—Distance records track points after a specified distancehas been traveled. Time creates track points after a specifiedtime has elapsed. Resolution records track points based upon theresolution. If you enter a higher resolution, the unit creates morepoints in the track.Value—records a track according to the Interval and Value. Enter aspecific distance, time, or resolution.Color—select a color for the track when it is displayed on the map.32 276C Plus Owner’s Manual190-00501-00_0A.indd 321/13/2005 10:43:34 AM