Owner's Manual - West Marine

BASIC OPERATION IN THE LAND MODES > NAVIGATING IN AUTOMOTIVE MODEAdding and Editing Stops (Via Points)You can add via points, or extra stops, to your route using Edit Vias.Via points are great for adding a stop at the gas station or bank toyour route and are really helpful when planning a long trip.To add via points to your route:1. While navigating your route, press the NAV key to open theNavigate Menu.2. Use the Rocker key to select Edit Vias and press ENTER.3. The Add/Edit Vias window opens. Highlight Add Via Pointand press ENTER.4. From the pop-up window, highlight either Use Map or UseFind Menu and press ENTER.a. If you selected Use Map, use the Rocker key to selectthe desired item on the map and press ENTER.b. If you selected Use Find Menu, select an item fromthe Find Menu as discussed in the “Finding an Item”beginning on page 15. Remember you can press MENUwhile the Find Menu is open to find an item near anotherlocation, such as your route destination.5. The new point is added to the route as displayed in the Add/Edit Vias page. Continue steps 3 through 4 until you haveadded all of the via points that you want. Highlight Done andpress ENTER to apply the new via points to the route.Add/Edit Vias PageShowing the original route without via points276C Plus Owner’s Manual 65190-00501-00_0A.indd 651/13/2005 10:43:49 AM