Owner's Manual - West Marine

BASIC OPERATION > CREATING AND USING WAYPOINTSEditing a WaypointYou can edit a waypoint from either the Points page of the MainMenu or the Waypoints category in the Find Menu.To edit the waypoint:1. Open the Waypoint page.2. Highlight the waypoint name, symbol, or another field youwant to change and press ENTER.Adding a Waypoint to a RouteYou can add the selected waypoint to the end of a route using theAppend to Route feature. This option is displayed when you arenot navigating. When you are navigating to a destination, Add toCurrent Route is displayed. The selected waypoint is added to thecurrent route before the route destination.To add a waypoint to the end of the route:1. Open the Waypoint page using one of the methods describedon the previous page. Press MENU.Symbol fieldName fieldWaypoint Page3. Use the Rocker key to select the desired symbol or to enterdata and press ENTER when done.To edit the next waypoint in the list:1. After you have edited the waypoint on the Waypoint Editpage (shown above), highlight Next and press ENTER.2. The Waypoint list is displayed with the next waypointhighlighted. Press ENTER to edit that waypoint.Waypoint Options Menu2. Highlight Append To Route or Add to Current Route andpress ENTER. The Select Route window appears.3. Highlight the desired route or select New Route, and thenpress ENTER.4. With OK highlighted, press ENTER to save the waypoint.276C Plus Owner’s Manual 25190-00501-00_0A.indd 251/13/2005 10:43:32 AM