Owner's Manual - West Marine

CUSTOMIZING YOUR 276C PLUS > SETTING UP THE SYSTEMChanging the Page SequenceThe Page Sequence tab in the Main Menu allows you to reorder anyof the pages displayed in the page sequence. Press PAGE or QUITto scroll through the page sequence.You can also add pages to the page sequence from this tab. If youadd a page from the Main Menu to the page sequence, that page nolonger appears in the Main Menu.Page Sequence TabHighlight ablank line andpress ENTERto add a pageto the sequenceTo change the page sequence:1. Press MENU twice to open the Main Menu. Use the Rockerkey to select Display from the vertical row of tabs.2. Press the Rocker key to the Right to select Page Sequence.3. To move a page in the order, highlight the page and pressMENU. Then select Move and press ENTER. Pressthe Rocker key Up or Down until the desired position isdisplayed and press ENTER.4. To insert a new page in the order, press MENU, select Insert,and press ENTER. From the list, select the page you want toadd and press ENTER.5. To remove a page from the page sequence, highlight thepage you want to remove and press MENU. Select Removeand press ENTER.6. Highlight Clear All and press ENTER to remove all pagesbut the Map page from the sequence.7. Highlight Include All and press ENTER to include all pagesin the sequence.Some Tips about the Page Sequence• Adjusting the Page Sequence is mode-specific. For example,if you are in Powerboat mode and you add the Tide pageto the sequence, the Tide page will not be added to theAutomotive mode sequence. This gives you complete controlin setting up your 276C Plus for each mode.• If you are using a Sonar Module, such as a Garmin GSD 20,you should add the Sonar page to the sequence.82 276C Plus Owner’s Manual190-00501-00_0A.indd 821/13/2005 10:43:55 AM