Leica TPS700 Series Field Manual - Surveying Equipment

Preparing a code listWith the computer program"Codelist-Manager", included inthe "Leica Survey Office"program code lists with up to ,200 codes with descriptions,attributes etc. can be preparedeasily and quickly, meaning thate.g. instead of Info1/ Attrib1, "Pkt-Art" may be defined. The definedtext is then display on theinstrument's screen when theapropriate attribute value isentered.The program enables theassignment of so called quickcode numbers to the individualcodes.The completed code list can thenbe loaded into the "Data ExchangeManager" (also includedin the "Leica Survey Office"program) of the instrument.Codeblock SearchesBasically there are two ways ofentering codes and attributes intothe list or selecting them from thelist.1. Directly in the measurementdisplay "Measuring &Registering" or in the"Surveying" application. Thesecodes are point referenced andare not saved right after theywere entered or selected butonly together with the nextmeasured point data. (ALL orREC-fixed key). The codeblockcontains the same pointnumber as the measurement.109