Leica TPS700 Series Field Manual - Surveying Equipment

Method 2: Measure Target Points42If the ATR is on and theHz direction is set to0°00'00", then deviations couldappear due to the ATR's positione.g. 0°00'05" to the Design valueof 0°00'00" . The instrument isfunctioning correctly.Confirms the orientation if noentry has been made, or sets andrecords the new orientation if anew point ID has been entered, ora new Hz-angle has been set.For determining the orientation, amaximum of 5 target points withknown coordinates can be used.3. Target pointTC700Z14Hz=0Hz13. Target point1. Target pointOrientation co-ordinates can beeither obtained from the internalmemory or entered manually.If an orientation point numbercannot be found in the internalmemory then the instrumentautomatically activates the manualentry of the co-ordinates.Activates input/edit mode for entryof a known orientation point.Dialog for orientation toseveral target points.