Leica TPS700 Series Field Manual - Surveying Equipment

Sets of measurements86If the point numbers of the targetpoints listed are stored in memoryof the instrument then automaticinstruments position themselveson the target point.In the configurations menu theoptions "AutoPosit." and"SearchCoor" must be set to"On".We recommend startingthe measurements inface 1.If the defined point numbers arenot stored in the instrument'smemory or if the defined targetpoints are stored but"SearchCoor" in theconfigurations menu is "Off", thefollowing message appears:Unknown position ofPtId: 100Search / Enter newcoordinates or sightmanually to target.Each target can be measuredmanually. The following isdisplayed on the measurementscreen.Starts searching for a target point.If the point is stored in memory itcan be selected from the display.If the point is not stored itscoordinates can be entered. Inboth cases the following appearson the measurement display.