Leica TPS700 Series Field Manual - Surveying Equipment

60MessagesNot enough memory!Hz (I - II) >1gon (54’)measure point againHz (I - II) >1gon (54'measure point againMore points or distance requiredMeaningThe present selected job is full and does not allow further storage.This error could occur either with measurements or when thesystem stores result data, such as station results, standarddeviations or residuals.This error occurs if a point was measured in one face and themeasurement in the other face differs by more than 180° ±0.9° forthe horizontal angle circleThis error occurs if a point was measured in one face and themeasurement in the other face differs by more than 180° ±0.9° forthe vertical angle readingThere are insufficient data measured to be able to compute aposition. Either there are not enough points used or not enoughdistances measured.