Leica TPS700 Series Field Manual - Surveying Equipment

166Sets V MeanPtID = Point IDPt# = Current point counterAvg. V = Average (V) of all Sets of AnglesTgHt = Reflector heightEDM Mode = Applied EDM mode, measurementprogrammm = Prism constant [mm]Prism Type = Prism typeATR on/off = ATR (on/off)Sets V ResidualsPtID = Point IDSet# = Current Set of Angles counterPt# = Current point counterResidual = Difference between single andcalculated Sets of AnglesV redu. = Average of the Sets of Angles (V) tothe current pointSets Dist ResultsActive Sets = Number of Sets of Angles used forthe calculationActive Pts = Number of targets used for thecalculationsSinglDist = Standard deviation of a singledistancesAvg. Dist = Standard deviation of the distancecalculated from all Sets of AnglesSets Dist MeanPtID = Point IDPt# = Current point counterAvg.Dist = Average (distance) of all Sets ofAnglesTgHt = Reflector heightEDM Mode = Applied EDM mode, measurementprogrammm = Prism constant [mm]Prism Type = Prism typeATR on/off = ATR (on/off)