Leica TPS700 Series Field Manual - Surveying Equipment

Reference Line in regards to the program74The calculation of thereference line isperformed in stages as per thediagram shown on the left.Return to the start-up programsReturn to the definition of a newbase line.Opens the "Orthogonal Setout"application.Opens the "Reference Line"applicationTC700Z101LineOffs1st reference pointreference linemeasured pointThe function calculateslongitudinal, transverse andheight differences relative to thereference line. After the firstdistance measurement, themeasurement dialog displays thecalculated values ( Line, Offs,) continually if trackingmode is activated.REF.LINE MEASUREPtID : 103TgHt : 1.550 mOffs: -0.054 mLine :0.020 m: 0.120 m