Leica TPS700 Series Field Manual - Surveying Equipment

Start-Up Programs158JobJob = Job nameOper = Observer nameRem1 = Comment 1Rem2 = Comment 2Date = DateTime = TimeStationStn = Station numberE0 = Station co-ordinate(Easting)N0 = Station co-ordinate(Northing)H0 = Station heighthi = Instrument heightOrientationTarget Point (1):PtID(1) = Point IDE(1) = EastingN(1) = NothingH(1) = HeightMeasurement (1):PtID(1) = Point IDHz(1) = Horizontal angleV(1) = Vertical angle(1) = Measured slopedistancehr(1) = Reflector heightTarget Point (n):PtID(n) = Point IDE(n) = EastingN(n) = NorthingH(n) = HeightMeasurement (n):PtNr(n) = Point IDHz(n) = Horizontal angleV(n) = Vertical angle(n) = Measured slopedistancehr(n) = Reflector heightResults:PtID(1) = Point ID of thefirst target pointBrg = Calculated azimuthbetween the stationco-ordinates and thefirst target point(based on thetelescope face inwhich orientationwas performed)