Leica TPS700 Series Field Manual - Surveying Equipment

Definition of the Base Line72The base line is given by twobase points. The base points canbe defined in three ways:• Measure point• Enter co-ordinates usingkeypad• Select point from memory.Definition of the base points:a) Measuring base points:Input a point number andindependent measurement ofthe base points using , or/ REC.b) Base points with co-ordinates:Input a point number. Thesearch for associated points inthe memory can be initiatedusing .If the required point is not inmemory or there are no validco-ordinates in the memory, theprogram prompts for manualentry of the co-ordinates.Analogous procedure for thesecond base point.BASELINE: Pt1Pt1 : 101TgHt:1.600 mHz : 236°56'14"V : 91°12'23": 15.457 m Return to the start-up programs.Activates selective point search(see "Point Search" section)Activates selective point search(see section of same name)Confirms the entry and continuesthe program.New entry of the first base point.Triggers a distancemeasurement.Triggers a distancemeasurement and register themeasured data.