Leica TPS700 Series Field Manual - Surveying Equipment

110If the code is to be savedbefore or after themeasurement can be set in thesystem configuration.MEAS & RECPtID : A101TgHt : 1.700 mCode : *Hz : 153°41'23"V : 82°12'17": ----.--- m 2. Using the FNC menu.These codes are saved asindepedant code blocks. Itispossible to sequentially saveseveral code blocks. This typeof coding is always availableand cen be called up in everyapplication.In both of the described ways theentered code is searched for inthe code list. If the correspondingcode is found it is displayed withthe defined attributes. If no codelist is loaded or the code is notlisted then the manual code entrymode is switched to automatically.1.1 Place cursor on "Code" .1.2 Enter wildcard joker (e.g. T*)or exact code discription andconfirm with . Codefunction is activated.