Leica TPS700 Series Field Manual - Surveying Equipment

Quick CodeUsing the quick code function, apredefined code can be calleddirectly via the numeric keypad onthe instrument. The code isselected by entering a two digitnumber, the measurementtriggered and the measured dataand code saved.A total of 100 codes can beassigned.Each code can be assigned aunique one or two digit number inthe Leica SurveyOffice "CodelistManager".If no numbers are allocated to thecodes in the "Codelist Manager",the code is selected inaccordance with the order inwhich the codes were entered inthe code list (01 -> first code inthe code list … 10 -> tenth codein the code list … 00 -> hundredth(and last) code in the code list.A two digit code mustalways be entered on theinstrument's numeric keypad evenif only a one digit code wasassigned in the Codelist Manager.For example: 4 -> enter 04.Quick code function isautomatically activated,when the cursor is on the button in the last line.115