Leica TPS700 Series Field Manual - Surveying Equipment

28Procedure:1. Enter the point ID and thereflector height2. Enter the offset values (length,cross and/or height) as per thesketch3. Define the period for which theoffset is to apply.4. calculates thecorrected values and jumps tothe application from which theoffset function was started. Thecorrected angle and distancesare displayed as soon as avalid distance measurementhas been triggered or exists.Leaves the function and returns to the application from which thefunction was started.The period of applicability can be set as follows:Reset after RECPermanentThe offset values are reset to 0 after the pointis saved.The offset values are applied to all furthermeasurements.The offset values are always reset to 0 when the application isquit.