Leica TPS700 Series Field Manual - Surveying Equipment

4. Store with measureddata of the remote point. Nonew distance measurement iscarried out.Height (H) and height difference( ) as function of actual V-angleand measured distance to basepoint are computed and displayedimmediately.Enter and measure a new basepoint.Target OffsetShortcut to the function"OFFSET".If it is not possible to set up thereflector directly, or it is notpossible to aim the target pointdirectly, the offset values (length,cross and/or height offset) can beentered. The values for the angleand distances are calculateddirectly for the target point.MeasurementPointOffs.Cross -Offs.Lngth -Offs.Cross +Elev. +:Offset point ishigher thanmeasurementOFFSET TARGET-PT.Offset PT.LOffs:2.200 mTOffs:3.660 mHOffs:1.780 mMode : Reset after RECOffs.Lngth + TC700Z9627